1, 35 Street, Al Satwa, Jumeirah, Dubai, United Arab Emirates

Gulf Scrap Station

48, 31B Street, Al Jafiliya, Bur Dubai, Dubai, United Arab Emirates

Oasis Reclaim Center

16, 11B Street, Al Khabaisi, Deira, Dubai, United Arab Emirates

Prime Metal Recovery

7, Latifa Hospital Street, Al Jadaf, Ras Al Khor, Dubai, United Arab Emirates

Arabian Iron & Scrap Depot

7/52, 22C Street, Al Safa 1, Jumeirah, Dubai, United Arab Emirates

Desert Scrap Hub

29, 6B Street, Al Hudaiba, Bur Dubai, Dubai, United Arab Emirates

Emirates Metal Recycle

Veneto Residence Street, Community Hessyan First, Alwajeha Albahriah, Dubai, United Arab Emirates

Continental Metal Solutions

10, 37A Street, Mankhool, Bur Dubai, Dubai, United Arab Emirates

Scrap & Materials\2

15, Motion Gate Street, Saih Shuaib 1, Alwajeha Albahriah, Dubai, United Arab Emirates

Scrap & Materials

Emirate of Dubai

Prepared heavy scrap 3/14" (6mm); typical HMS #1 charge

HMS #1 (Heavy Melting Steel 3/14)

HMS #1 (Heavy Melting Steel, prepared)

HMS #1 (Heavy Melting Steel)

HMS #2 (Heavy Melting Steel)

HMS #1 shear-cut prepared (like ISRI code 214)

HMS #1 (Heavy Melting Steel) ISRI 214 

Mixed/unsorted per GOST; sold to buyer’s specs

Mixed/unsorted ferrous scrap

Unprepared Heavy Melt (oversize), Unprepared HMS/P&S (oversize), buyer’s specs

Unprepared Heavy Melt (oversize), buyer’s specs v1

High-Mn wear steel often unprepared/oversize

Alloy/Manganese steel (Hadfield) scrap (oversize), to chemistry spec

Bundles of new black sheet clippings (uncoated, unpainted), prepared to charging-box size with a density of about 1.2 t/m³

No.1 Bundles. New sheets, High quality

Bundles of old baled black/galvanized sheet scrap, hydraulically compressed to charging-box size with a density of about 1.2 t/m³

No.2 Bundles. Old black/coated sheets, Medium quality

No.3 Bundles. Old coated or enameled sheets, Basic quality

Loose feed for bundles; when baled becomes No.1/No.2 Bundles depending on chemistry/coating

Baling feedstock No.1 (loose)

Thin sheet/roofing/tinplate/sheetings; when baled = No.2 or No.3 Bundles

Old light-gauge sheet scrap (may be bundled) (for baling)

Cleaner light sheet baled; classed as No.2 Bundles

Old light-gauge sheet scrap (for baling, higher grade)

Steel wire rope & wire scrap

Steel turnings, clean (shoveling/machine shop) No.1 

Vine-like (coiled) steel turnings

Cast iron scrap No.) (cupola grade)

Mixed cast or high-P sanitary castings sold as mixed cast

Cast iron scrap, high-P (sanitary castings)

Heavy breakable cast iron, oversize pieces

Oversize cast iron scrap (industrial castings)

Cast iron scrap (charging box size)

Rail steel No.1 standard section rails, long lengths

Rail steel scrap (No.1 Rail) (R50–R65), standard section

Rail steel cropped ends/short pieces (28/29)

Rail cropped ends / Short rails

Thin-gauge galvanized sheet; maps to No.2 Bundles when baled

Old galvanized sheet scrap (for baling)

HMS #1 (Heavy Melting Steel) cut

Oversize carbon steel floor prepared specification

Unprepared Heavy Melt (oversize carbon steel), buyer’s specs

Unprepared heavy steel scrap (torch/shear)

Unprepared Heavy Melt (oversize), buyer’s specs

Punchings & plate scrap

Briquetted steel turnings No.1

Briquettes of steel turnings No.2 (higher tramp content)

Briquetted steel turnings No.2

High-Mn wear steel handled as special grade

Manganese steel (Hadfield) scrap

Coated/tinned sheet, typically processed as No.3 Bundles when baled

Old light-gauge sheet scrap, lower quality

Baling-grade light sheet, sized for dispatch

Old light-gauge sheet scrap (dimensioned for baling)

Oversize cast iron with higher phosphorus

Oversize cast iron, high-P

Feed for bundle production; buyer’s specs when loose

Baling feedstock (loose old sheet)

Unprepared Heavy Melt (oversize), buyer’s specs v 10

Unprepared Heavy Melt (oversize), buyer’s specs v 20

Light tubes/sheet typical 1/8-12 sizes; usually baled

Thin-wall tubing / light sheet scrap (for baling)

Unprepared heavy scrap requiring torch/shear processing

Unprepared Heavy Melt (oversize scrap), buyer’s specs

Heavy/oversize cast iron scrap

Unprepared Bulky Heavy Melt (oversize), buyer’s specs

Steel turnings: No.1 clean, short turnings/drillings

Steel turnings, clean (shoveling/machine shop)

Steel turnings 20/22, may include borings

Steel turnings (boring or mixed)

Vine-like turnings; typically demilitarized or mixed with turnings grades per mill spec

Springy/bushy steel turnings (coiled)

Automotive/industrial springs; ISRI 248 "Springs and crankshafts"

Spring steel scrap

Foundry P&S cut scrap (clean plates/structurals), size reduced

P&S (Plate & Structural) prepared

Aluminum lithographic sheets

Wrought aluminum alloy scrap (clean)

Aluminum new scrap – sheet / extrusion clean

Mixed low-grade aluminum scrap

Aluminum wire and conductor scrap

Aluminum castings – clean

Cast aluminum scrap

Aluminum sheet scrap – coated or painted

Aluminum turnings (mixed)

Aluminum foil and thin sheet scrap

Aluminum turnings

Aluminum wrought scrap – Al-Mg alloys (AMg series, sheet and profiles)

Mixed aluminum alloys – old sheet and extrusions

New aluminum wire and cable scrap

Painted aluminum extrusions

Aluminum beverage cans (UBC)

Aluminum dross and skimmings

Aluminum foil scrap

No. 1 copper wire and heavy scrap

Copper turnings – clean

Copper turnings – oily / mixed

High-grade copper scrap (refinery grade)

No. 1 copper heavy scrap

Mixed copper and brass scrap

Copper wire scrap – unstripped cable

Copper radiators – clean

Copper-brass radiators – mixed

Tungsten scrap (hardmetal / carbide)

Tungsten scrap – tool steel residues

Tungsten carbide scrap – clean

Cobalt scrap – pure metal and high-grade alloys

Cobalt-bearing alloys (mixed)

Cobalt residues / sludges

Yellow brass solids – clean

Yellow brass turnings – clean

Cartridge brass solids – clean

Red brass solids / bronze brass mix

Cartridge brass turnings

Mixed brass scrap (low-grade)

Yellow brass solids scrap

Bronze scrap – high-lead/tin bronze solids and borings

Bronze bearing metal / babbitt scrap

Tin bronze castings scrap (solids)

High-grade tin bronze solids scrap

Nickel scrap – pure nickel and wrought nickel alloys (high grade)

Nickel-bearing alloy scrap (high-nickel alloys, Ni-Cu etc.)

Lower-grade nickel-bearing alloy scrap

High-tin babbitt / tin-based bearing alloys

Block tin scrap (high-purity tin)

Tinplate scrap (tin-coated steel sheet and cans)

Mixed tin-base babbitt and bearing alloys

Tin dross, skimmings and residues

Soft lead scrap – clean pipes, sheets, cable sheathing

Mixed hard / soft lead scrap (battery grids and castings)

Lead-acid battery scrap (monoblocks and plates)

Soft lead scrap – lower grade, with attachments

Hard / antimonial lead scrap

Lead dross, slags and paste

Titanium solids scrap (clean, unalloyed)

Titanium alloy scrap (mixed grades)

Titanium turnings and shavings

Zinc die cast scrap (clean)

Zinc new clippings / punchings

Mixed zinc scrap (painted / coated)

Zinc ash / dross

Aluminum dross / slag

Aluminum litho sheets

Container drop-off/placement

Container offload

Crane loading

Crane unloading

Cutting

Cutting required

Dismantling

Dismantling required

Loader-assisted unloading

Manual loading crew

Manual loading/handling

Other conditions

Priority pick-up

Steel

Cast Iron

Alloy Steel

Other

Aluminum

Copper

Tungsten

Cobalt

Brass

Bronze

Nickel

Lead

Titanium

Zinc

Processed ferrous scrap from end-of-life vehicles and machinery, such as: cars, trucks, motorcycles, trailers, and agricultural equipment. Includes: HMS #1; HMS #2; P&S (Plate & Structural); Shredded scrap (ISRI 210–211); Automotive scrap grades.

Automotive purposes

Construction and structural scrap, sourced from dismantled buildings, heavy machinery, and industrial equipment. Includes: - Structural steel (channels, rebar, beams, profiles) — HMS #1 / P&S (Plate & Structural); - Large-diameter pipes — HMS #1 prepared / Heavy P&S; - Steel turnings and borings — Shredded steel (ISRI 213); - Cast iron scrap (ingot moulds, pallets, machine bases) or Cast iron scrap ISRI 200 series; - Counterweights, anvils — Heavy cast scrap; - Sheet steel offcuts, strips — Sheet scrap / No.2 Bundles; - Heavy steel plates — HMS #1 cut-to-size / P&S; - Tracks, hammers — Foundry and industrial heavy scrap.

Construction purposes

Heavy melting scrap, prepared for shipment to steel mills. Ready-to-ship processed ferrous scrap. Includes: HMS (Heavy Melting Scrap) - Old standard specific; HMS #1; HMS #2; HMS #1 cut-to-size; No.1/2/3 Bundles.

Finished goods

Household and light consumer scrap, collected from decommissioned appliances, fixtures, and domestic equipment. Includes: - Large household appliances (washing machines, dishwashers, stoves, refrigerators, microwaves) — HMS #1/#2; - Computer system units and small electronics — Shredded scrap (ISRI 210–211); - Light sheet metal from garages, cookware, tools, and furniture — No.2 Bundles / Mixed sheet scrap; - Plumbing and heating scrap (bathtubs, sinks, radiators, pipelines) — P&S (Plate & Structural) / Heavy scrap.

Household purposes

Industrial-grade scrap from heavy manufacturing, foundries, and dismantled equipment, such as oversized ferrous materials, foundry castings, and machine-shop scrap. Includes: -Structural steel (channels, rebar, beams, profiles) — HMS #1 / Plate & Structural (P&S); - Large-diameter pipes — HMS #1 prepared / Heavy P&S; - Steel turnings and shavings — Steel turnings (ISRI 207–209); - Cast iron moulds, pallets, machine bases — Cast iron scrap ISRI 200 series; - Counterweights, anvils — Foundry cast scrap; - Steel sheet offcuts, trimmings, strips — Sheet scrap / Bundles; - Heavy steel plates — HMS #1 cut-to-size / P&S; - Tracks, industrial hammers — Heavy foundry scrap / Oversized ferrous.

Industrial purposes

Ferrous scrap, derived from decommissioned rolling stock and railway infrastructure, such as: rails, wheelsets, wagon body structures, and other railway components. Includes: HMS #1; P&S (Plate & Structural); Rail scrap (ISRI 27–28); Cast/wrought steel scrap suitable for remelting.

Railway purposes

Reception points for colored metals

Recycle Souk

Gulf Scrap Station

Recycle Souk

Oasis Reclaim Center

Recycle Souk

Prime Metal Recovery

Recycle Souk

Arabian Iron & Scrap Depot

Recycle Souk

Desert Scrap Hub

Recycle Souk

Emirates Metal Recycle

Recycle Souk

Continental Metal Solutions

Recycle Souk

Scrap & Materials\2

Recycle Souk

Scrap & Materials